Total dynamic response of a PSS vehicle negotiating asymmetric road excitations

A planar suspension system (PSS) is a novel automobile suspension system in which an individual spring–damper strut is implemented in both the vertical and longitudinal directions, respectively. The wheels in a vehicle with such a suspension system can move back and forth relative to the chassis. When a PSS vehicle experiences asymmetric road excitations, the relative longitudinal motion of wheels with respect to the chassis in two sides of the same axle are not identical, and thus the two wheels at one axle will not be aligned in the same axis. The total dynamic responses, including those of the bounce, pitch and the roll of the PSS vehicle, to the asymmetric road excitation may exhibit different characteristics from those of a conventional vehicle. This paper presents an investigation into the comprehensive dynamic behaviour of a vehicle with the PSS, in such a road condition, on both the straight and curved roads. The study was carried out using an 18 DOF full-car model incorporating a radial-spring tyre–ground contact model and a 2D tyre–ground dynamic friction model. Results demonstrate that the total dynamic behaviour of a PSS vehicle is generally comparable with that of the conventional vehicle, while PSS exhibits significant improvement in absorbing the impact forces along the longitudinal direction when compared to the conventional suspension system. The PSS vehicle is found to be more stable than the conventional vehicle in terms of the directional performance against the disturbance of the road potholes on a straight line manoeuvre, while exhibiting a very similar handling performance on a curved line.     

Simultaneous observation of the wheels’ torques and the vehicle dynamic state

The goal of the present study is to show how it is possible to estimate online the individual torques applied at each wheel of an automotive vehicle by using an unknown input observer together with a simple nonlinear state-space model. The necessary measurements are the steering angle, the usual rotation speed of each wheel plus the vertical load at the centre of each wheel. By doing this, this study anticipates the affordability of a new generation of wheel bearing with embedded measurements of transmitted forces. Successful simulated experimentations using a realistic simulator are shown. Validations are done using classical case studies of longitudinal, lateral and coupled dynamics. The present limits and some possible improvements of the proposed method are also discussed.     

A design methodology for mechatronic vehicles: application of multidisciplinary optimization,multibody dynamics and genetic algorithms

A design methodology for mechatronic vehicles is presented. With multidisciplinary optimization (MDO) methods, strongly coupled mechanical, control and other subsystems are integrated as a synergistic vehicle system. With genetic algorithms (GAs) at the system level, the mechanical, control and other relevant parameters can be optimized simultaneously. To demonstrate the feasibility and efficacy of the proposed design methodology for mechatronic vehicles, it is used to resolve the conflicting requirements for ride comfort, suspension working spaces and unsprung mass dynamic loads in the optimization of half-vehicle models with active suspensions. Both deterministic and random road excitations, both rigid and flexible vehicle bodies and both perfect measurement of full state variables and estimated limited state variables are considered. Numerical results show that the optimized vehicle systems based on the methodology have better overall performance than those using the linear quadratic Gaussian (LQG) controller. It is shown that the methodology is suitable for complex design optimization problems where: (1) there is interaction between different disciplines or subsystems; (2) there are multiple design criteria; (3) there are multiple local optima; (4) there is no need for sensitivity analysis for the optimizer at the system level; and (5) there are multiple design variables.     

Generalised multi-axle vehicle handling

The familiar two-axle bicycle model and associated basic concepts of vehicle handling are reviewed and used to introduce minor changes in convention from the literature. The two-axle model is extended to a three-axle vehicle to illustrate the effectiveness of the notation combined with a simplifying mathematical identity found in the two-axle vehicle literature. A generalised model is then developed that produces dynamic equations of motion by inspection for a vehicle with an arbitrary number of steerable and non-steerable axles. Furthermore, the vehicle dynamic concepts of understeer and wheelbase are generalised and can be directly computed for various arbitrary vehicle configurations.     

Wear simulation for the centre plate arrangement of a freight car

The bodies of many railway freight cars in many countries of the world are coupled to the running gear by means of a body centre plate that makes a friction pair with a centre bowl. During motion, the bogie is rotated and moved with respect to the car body. This leads to wear on the contact surfaces. Lubrication is inexpedient in this case because the friction forces damp the vibrations (so-called bogie hunting) during motion. Usually, centre plates exhibit noticeable wear after two years of operation. Reducing wear requires knowing details of the wear process which, in turn, requires computer simulation of freight car motion for an operation period of 10–15 years. The purpose of this paper is to develop a universal method for wear simulation of friction pairs that could be used, in particular, for the centre plate of a freight car.     

A nonlinear virtual rider for motorcycles

This work presents a virtual rider for the guidance of a nonlinear motorcycle model. The target motion is defined in terms of roll angle and speed. The virtual rider inputs are the steering torque, the rear-wheel driving/braking torque and front-wheel braking torque. The virtual rider capability is assessed by guiding the nonlinear motorcycle model in demanding manoeuvres with roll angles of 50° and longitudinal accelerations up to 0.8 g. Considerations on the effective preview distance used by the virtual rider are included.     

超声降解废水机理及空化气泡运动过程数值模拟

阐述了超声降解废水的机理,并根据以体积作为动力学参数的气泡动力学模型进行数值模拟,结果表明,低频下的空化强度更大,更有利于降解过程,而驱动声压和初始气泡大小则存在一个最佳值,同时与传统的R-P方程作了比较,两个模型模拟结果基本一致,表明本文所用模型也适用于对气泡运动过程的模拟.     

内侧轴箱式转向架曲线通过性能研究

内侧轴箱式转向架是一种新型结构模式的转向架。文章通过动力学仿真软件对该结构转向架的曲线通过性能进行了计算,并在与传统转向架动力学性能对比的基础上,进一步研究了内侧轴箱式转向架的曲线通过性能。     

Assessment of the influence of the elastic properties of rail vehicle suspensions on safety,ride quality and track fatigue

A sensitivity analysis has been performed to assess the influence of the elastic properties of railway vehicle suspensions on the vehicle dynamic behaviour. To do this, 144 dynamic simulations were performed modifying, one at a time, the stiffness and damping coefficients, of the primary and secondary suspensions. Three values were assigned to each parameter, corresponding to the percentiles 10, 50 and 90 of a data set stored in a database of railway vehicles. After processing the results of these simulations, the analysed parameters were sorted by increasing influence. It was also found which of these parameters could be estimated with a lesser degree of accuracy in future simulations without appreciably affecting the simulation results. In general terms, it was concluded that the highest influences were found for the longitudinal stiffness and the lateral stiffness of the primary suspension, and the lowest influences for the vertical stiffness and the vertical damping of the primary suspension, with the parameters of the secondary suspension showing intermediate influences between them.     

汽车前照灯水汽凝聚现象的瞬态CFD预测

汽车前照灯光品质是衡量汽车照明系统安全性的一项重要指标。通过商用计算流体力学(Computational Fluid Dynamics,CFD)软件Star-CCM+对汽车前照灯内部的流动情况、热力学特性以及起雾/除雾过程进行了模拟。研究表明,雾层厚度与分布主要与湿度、流动条件以及换热条件相关。探索了完整的大灯起雾仿真流程和CFD物理模型,研究了适用于该类开发的空气动力学、热学以及相变的边界条件设置。基于此研究,针对某前照灯原型模型进行模拟,并分析了该模型的起雾现象,依据仿真结果对该款车灯提供了改良意见。